Whiskey and Tea, Goat Milk, Honey, and Beeswax

Notes:

Liquid is, of course, goat's milk. Mostly. 6 oz goat milk, 3 oz water. Cool it (or allow it to thaw) and shake well, before starting.
In a large pot over medium-low heat, combine olive oil, lard, coconut oil, sweet almond oil, and beeswax. Heat until they are melted and incorporated. Remove from heat and allow to cool to 90-100°F.
Put on protective gear including a mask, gloves, and long sleeves. Outside, very slowly pour only ¼ of the lye into the milk-water and stir until dissolved. Let cool for 20 minutes. Repeat until all lye is dissolved into the milk-water. The milk may brown; no worries. Allow to cool to 90-100°F. If oil or lye water cool at different rates, use a cold or hot water bath in the sink.
Prepare molds however. If solid, non-patterned mold, use parchment paper. If patterned, don't do anything, just let the soap sit for 5-7 days before removing.
When both oils and lye water are around 90-100°F, pour the lye water into the pot of oils. Use a stick blender or hand mixer to mix for 1 to 2minutes and then let the mixture rest for 4 to 5 minutes. Repeat mixing and resting until light trace.
Add scent oils and honey and blend for 30 seconds.
Pour soap into mold(s) and let sit for 24 hours+ (depending on above). If using solid mold, cut into bars after 24 hours.
Let cure for 4-6 weeks.

Liquid Required	9.09 oz	257.8 g
NaOH Weight at 99 % Purity	4.55 oz	128.9 g

Oil	%	Ounces	Grams
Olive Oil	30.3	10	283.5
Walmart GV Shortening, tallow, palm	36.36	12	340.19
Almond Oil, sweet	3.03	1	28.35
Coconut Oil, 92 deg	24.24	8	226.8
Beeswax	6.06	2	56.7
Total	100	33	935.53