Ebonit soap (15

When the oil-greas-wax mixture is about 60-65 ° C, work begins. It is not advisable to cool it down further, as it precipitats beeswax. With continuous blending, add the 40 ° C lye solution slowly to make it cool, otherwise it can cook. In the meantime, you should not stop the winding, as the process immediately freezes. Pudding very quickly. In the meantime, some non-accelerating essential oil may be added. In the end, you may still end up risking mixing in a small amount of honey or sugar solution, though this may cause it to heat up and separate immediately, and can only be cured by the HP process. If you have succeeded so far, there is a quick shovel into the mold with a quick finish. There is no time for soap modeling and coloring. Plug in a meat spike thermometer quickly and march out onto the cold floor. It will gel, almost flow. Pray, listen, and act quickly when needed. Take it back to the room or take it back to the cold stone as the process requires. Hopefully it won't crack. When the temperature drops below 55 ° C and does not rise back, you have probably won. It will have a deliciously rich creamy foam. Good luck!